FEP/PTFE (standard wall) Dual Shrink tubing
Par un écrivain mystérieux
Description
FEP/PTFE Dual Shrink Heat Shrinkable Tubing
NOTE - Due to extreme instability in the PTFE market, prices are subject to change without notice. Lead times can be up to 10 weeks.
Features
Continuous operating temperature -454°F to 500°F (-270°C to 260°C)
Outstanding resistance to almost any chemical known (exceptions: alkali metals in molten state, fluorine gas at high temperatures, chlorine trifluoride).
FDA and USP Class VI approved
Very low coefficient of friction
Good dielectric strength
Flame rating UL94 V0 and VW-1
Limiting Oxygen Index greater than 95
ETO and autoclave sterilizable
Mil spec approved (AMS-DTL-23052/12)
FEP/PTFE Dual Shrink Heat Shrinkable Tubing PTFE heat shrink tubing has a very high continuous use temperature (260°C), and outstanding chemical resistance. Combining this with a lower melt temperature material (FEP) on the inside makes the only high temperature adhesive lined heat shrink tubing on the market. It is available in 2:1 shrink ratio, and meets or exceeds the most stringent commercial (UL VW-1, UL 910, NFPA262) and military standards (AMS-DTL-23053/12). Features Continuous operating temperature -454°F to 500°F (-270°C to 260°C) Outstanding resistance to almost any chemical known (exceptions: alkali metals in molten state, fluorine gas at high temperatures, chlorine trifluoride). FDA and USP Class VI approved Very low coefficient of friction Good dielectric strength Flame rating UL94 V0 and VW-1 Limiting Oxygen Index greater than 95 ETO and autoclave sterilizable Mil spec approved (AMS-DTL-23052/12)
FEP/PTFE Dual Shrink Heat Shrinkable Tubing PTFE heat shrink tubing has a very high continuous use temperature (260°C), and outstanding chemical resistance. Combining this with a lower melt temperature material (FEP) on the inside makes the only high temperature adhesive lined heat shrink tubing on the market. It is available in 2:1 shrink ratio, and meets or exceeds the most stringent commercial (UL VW-1, UL 910, NFPA262) and military standards (AMS-DTL-23053/12). Features Continuous operating temperature -454°F to 500°F (-270°C to 260°C) Outstanding resistance to almost any chemical known (exceptions: alkali metals in molten state, fluorine gas at high temperatures, chlorine trifluoride). FDA and USP Class VI approved Very low coefficient of friction Good dielectric strength Flame rating UL94 V0 and VW-1 Limiting Oxygen Index greater than 95 ETO and autoclave sterilizable Mil spec approved (AMS-DTL-23052/12)
Dual Wall and Adhesive Lined heat Shrink Tubing and Tape
FEP heat shrink tubing & sleeving - Adtech
PTFE-FEP Dual Wall Heat Shrink - APT
PTFE-FEP dual wall heat shrink tube
FEP Heat Shrink Tubing, fluorinatedethylenepropylene
PTFE FEP Dual Wall High Temperature Heat Shrink Tubing
Heat-shrink tubing – BIT Bierther GmbH
PTFE Heat shrink tubing 2:1 - ElringKlinger Engineered Plastics
Daburn SH400 Heat Shrinkable FEP Tubing (MIL-I-23053/11, AMS-DTL
PTFE-FEP dual wall heat shrink tube
3: 1 Dual Wall PE Raychem Heat Shrink Tube with Glue - China Heat
Why use PTFE/ FEP dual wall heat shrink? - Adtech
What is Heat Shrink Tubing and How is it Used?
FEP Heat Shrinkable Tubing Manufacturers and Suppliers in the USA
depuis
par adulte (le prix varie selon la taille du groupe)